EPE'2007, "12th European Conference on Power Electronics and Applications", Aalborg, Denmark, du 2 au 5 septembre 2007.
Copyright - [Précédente] [Première page] [Suivante] - Home

Fiche : [DIV494]

Titre : EPE'2007, 12th European Conference on Power Electronics and Applications, Aalborg, Denmark, du 2 au 5 septembre 2007.

Cité dans : [CONF004] EPE, European Conference on Power Electronics and Applications, juillet 2012.
Cité dans : [DATA224] Liste alphabétique des conférences, août 2016.
Cité dans :[99DIV081] Dates des congrès sur les Convertisseurs Statiques, avril 2013.
Cité dans : [DIV003]  Liste des actes de congrès par années, février 2003.
Cité dans : [DIV007]  Classement par type de Congrés et de revues IEEE, avril 2003.
Auteur : Thierry LEQUEU

Date : du 2 au 5 septembre 2007
Lieu : Aalborg, Denmark.
Synopsis : 1 novembre 2006
Notification : 1 mars 2007
Final_Paper : 15 mai 2007

Site : http://www.EPE2007.com
Site : http://www.epe-association.org
Lien : EPE/EPE2007/CFP-EPE-2007.pdf - 343 Ko, 3 pages.
Lien : EPE/EPE2007/index.html - 6 Ko, 13 juin 2006.
Lien : EPE/EPE2007/FinalProgramme2007.pdf - 562 Ko, 100 pages.
Vers : Liste des articles
Vers : Full Papers List

Contact : Nancy Langsberg
Adresse : EPE Association - c/o VUB-TW-ETEC - Pleinlaan 2 - B - 1050 Brussels - Belgium
Phone : 32 2 629 28 19
Fax : 32 2 629 36 20
Lien : mailto:nlangsbe@vub.ac.be
Site : http://www.epe-association.org


Liste des articles

TOP

  [1] :  [PAP608]  T. LEQUEU, B. BIDOGGIA, Y. DERRIEN, N. GODEFROY, Two Examples of Pedagogical Applications of Electrical Go-Karts, EPE 2007, Aalborg, Denmark, September 2-5, 2007, 9 pages.
  [2] :  [DIV520]  Recherche sur les mots clés ELECTRICAL GO KART, mars 2013.
  [3] : [SHEET572] C.R. AKLI, X.ROBOAM, B. SARENI, A. JEUNESSE, Energy management and sizing of a hybrid locomotive, EPE'2007, Danemark, 3-5 september 2007, 10 pages.
0011 : Universities Collaboration in Teaching Power Electronics
0084 : Voltage and Current Ripple Considerations for Improving Ultra-Capacitor Lifetime While Charging with Switch Mode Converters
0146 : High-Resolution Phase Shift and Digital Implementation of a Fuel Cell Powered UPS System
0191 : Supercapacitors and Battery power management for Hybrid Vehicle Applications Using multi boost and full bridge Converters
0223 : Research and test platform for hybrid electric vehicle with the super capacitor based energy storage
0224 : ENERGY MANAGEMENT AND SIZING OF STORAGE DEVICES OF A HYBRID LOCOMOTIVE
0226 : Method of identifying voltage difference of super capacitors and principle of voltage balancing
0228 : Configuration and verification of the super capacitor based energy storage as peak power unit in hybrid electric vehicles
0259 : Modelling & Control of a Bidirectional Converter for a Stand-alone Photovoltaic Power Plant
0303 : Traction Power Converter for PEM Fuel Cell Multi-Stack Generator
0318 : Fully FPGA-Based System on Chip Solution for Current Control of AC Machine.
0346 : ELECTRIC BICYCLE USING BATTERIES AND SUPERCAPACITORS
0368 : BI-DIRECTIONAL DC- DC CONVERTERS FOR SUPERCAPACITOR BASED ENERGY BUFFER FOR ELECTRICAL GEN-SETS
0370 : A Novel Nine-Switch PWM Rectifier-Inverter Topology for Three-Phase UPS Applications
0402 : An Improved Power Electronics Training Platform Using PIC Microcontrollers
0411 : Wind generation stabilization using a hydrogen buffer
0422 : Exercise Bike Powered Electric Generator for Fitness Club Appliances
0440 : 600V SOI Gate Driver IC with Advanced Level Shifter Concepts for Medium and High Power Applications
0566 : Implementation of supercapacitors in uninterruptible power supplies
0569 : A NOVEL TOPOLOGY WITH HIGH EFFICIENCY FOR GRID CONNECTED PHOTOVOLTAIC PCS
0587 : A simple model of photovoltaic module electric characteristics
0663 : Experimental study of supercapacitors ageing according to the temperature
0693 : Teaching drive control using Energetic Macroscopic Representation - initiation level
0743 : Novel Inverter Topologies for Two-Wheel Drive Electric Vehicles with Two Permanent Magnet Synchronous Motors
0795 : Specialized Receivers for Three-Phase Contactless Energy Transfer Desktop Applications
0858 : Accurate Sliding-Mode Control System Modeling for Buck Converters
0907 : Design of Propulsion System for a Fuel Cell Vehicle
0909 : A Novel Simulation Algorithm for Frequency Analysis of Switching Converters
0956 : HYSTERETIC CURRENT CONTROLLED ZVS DC/DC CONVERTER FOR AUTOMOBILES


Full Papers List

TOP

0001 : Harmonic Draining Transformer-Coupled Boost-Type Rectifier Systems with Sinusoidal Input Currents
0004 : A Five-Level Inverter Scheme with Common-Mode Voltage Elimination by Cascading Conventional Two-Level and Three-Level NPC Inverters for an Induction Motor Drive
0007 : High Efficiency Control Methods for Class-E Resonant Converter for Step-Down Applications Using Piezoelectric Transformers (PT)
0011 : Universities Collaboration in Teaching Power Electronics
0012 : Multi-Interleaved Zero-Ripple VRM to Power Future Microprocessors
0013 : A Simple Feedback for Parrallel Operation of Current Controlled Inverters involved in UPS
0014 : A NEW STRUCTURE OF A SWITCHING FLUX SYNCHRONOUS POLYPHASED MACHINE WITH HYBRID EXCITATION
0019 : General Aspects of the Electrical Drive Systems Optimal Control
0020 : Additional Application Fields of a Modern Wind Generator Even at No–Wind
0021 : DC-reactor-less hybrid DC-DC converter with a core composed of four legs
0022 : A Novel Space Vector Modulation Control Strategy for Three-leg Four-Wire Voltage Source Inverters
0023 : Modeling of Electrical Power Distribution Systems with a Dynamic-RMS Method
0028 : An Online Control Strategy for a Modular DC Coupled Hybrid Power System
0029 : Dynamic characterization of Power Converters for Distributed Power Supply
0030 : Design and implementation of a fuzzy controller for wind generators performance optimisation
0032 : A Single Sensor Type MPPT Control Method for PV Generation Systems
0033 : Predicting the influence of placement of passive components on EMI behaviour
0042 : SPEED MEASUREMENT AND ESTIMATION ALGORITHMS IN AC INDUCTION MOTORS
0044 : New algorithm for grid synchronization based on Fourier series.
0045 : Three Phase Current Source Auxiliary Resonant Commutated Pole Inverter using IGBTs
0046 : Efficient Scheduler-Dispatcher Software Architecture of the Space Power Facility Distributed Control Computer
0047 : Design of Avalanche Capability of Power MOSFET by Device Simulation
0048 : Matrix converter with advanced control for contactless energy transmission
0051 : A MATHEMATICAL DESCRIPTION OF CONTROL METHOD ON THE BASIS OF DIFFERENCE CORRECTION
0052 : Impact of power quality disturbances on PV inverters – Performance of integrated protective functions
0053 : Control System Simulation of a 40 kW Half-Bridge Isolated DC-DC Converter
0054 : Comparing piezoelectric transformer working with PLL and with non-linear load approaches in DC-DC converter
0057 : ESBT Power Switch in High-Power High-Voltage converters
0058 : Direct Torque Control using Space Vector Modulation and dynamic performance of the drive, via a Fuzzy Logic controller for speed regulation
0059 : High efficiency High reliability Inverter for Aeronautical Applications
0060 : Robustness and turn-off losses of high voltage IGBT
0061 : FACTS for dynamic load balancing and voltage support in rail traction
0062 : Reduction of common mode currents generated by three-level inverters with consideration of motor overvoltages
0063 : Real-Time Performance Testing of a ? VS WM Inverter-Fed Induction Motor
0066 : An adaptive hysteresis current control for a five-level inverter for active power filters
0073 : Construction of a Hybrid Electrical Racing Kart as a Student Project
0074 : TEST BENCH FOR THE SIMULATION OF A HYBRID POWER TRAIN
0075 : Potentials for Reducing the Power Requirement of Magnetic Suspension Systems by implementing a Linear Quadratic Gaussian Controller
0076 : Sensorless Operation of the Switched Reluctance Machine
0077 : Earth-Fault Protection of VLT AutomationDrive FC 301
0079 : Development of a 1.2MVA Active Front End Using Parallel Industrial Units
0080 : Control and Energy Management of a Wind-Photovoltaic Hybrid System
0081 : Core Losses Measurements in Intercell Transformers for Interleaved Converters
0082 : Magnet Power Converters for the New Booster of Elettra
0083 : A two-motor centre-driven winder drive fed by a five-leg voltage source inverter
0084 : Voltage and Current Ripple Considerations for Improving Ultra-Capacitor Lifetime While Charging with Switch Mode Converters
0085 : Optimized destabilizing islanding protection scheme for grid-tied inverters insensitive to short term network disturbances
0086 : A less sensor control method of PMSM using a hall sensor
0088 : Synchronous Balanced Control of Cascaded Two-Level Inverters with Separated DC-Sources
0089 : Inverter topology comparison for remedial solution in transistor faulty case
0090 : Investigation on power supply operation for the Helias Stellarator Fusion Reactor
0091 : PERFORMANCE CHARACTERISTICS OF THE REDUCED COMMON MODE VOLTAGE NEAR STATE PWM METHOD
0092 : FPGA based Sequential Switching control strategy for a Three Phase Inverter
0093 : Development of SMES system using dry-type superconducting coil
0094 : A Non-Isolated Interleaved ZVT Boost Converter with High Step-Up Conversion Derived from its Isolated Counterpart
0095 : An Optimized Controller with Zero Steady Circulating Current in Multi-inverter Parallel Operation
0096 : An Isolated Interleaved Active-Clamp ZVT Flyback-Boost Converter with Coupled Inductors
0097 : Robust DTC-SVM Method for Matrix Converter Drives with Model Reference Adaptive Control Scheme
0098 : Photovoltaic Power System with Simplified Cascade Boost Choppers
0100 : A New On-line Approach for Determining Conducting Angles in Multilevel Cascaded Inverters
0101 : A Comparative Study of Steady-State Characteristics of Permanent Magnet Synchronous Generator Systems
0102 : Numerical Analyses of Minimum Energy Operation of Multiple Trains under DC Power Feeding Circuit
0103 : Impact of Remote Sensing on Converter Stability and Performance
0104 : Influences of magnetic inductance, leakage inductance and saturable inductance on an active clamp forward converter
0106 : Envelope Model for Resonant Converters and Application in LLC Converters
0107 : Design of robust PID controllers for PMSM drive with uncertain load parameters
0108 : The bidirectional Z-source inverter for energy storage application
0109 : Comparative study of the optimal number of phases for interleaved Voltage Regulator Modules
0115 : Analysis of a DSP-system in order to flexibly control a switch mode power supply
0116 : A FPGA Based New Space Voltage Vector Modulation Inverter Considering Voltage Saturation for Speed Servo System of Induction Motor
0117 : One-Phase Reluctance Generators in Low-Power Wind Plants
0120 : Preliminary experimental evaluation on PT-IGBT in parallel connection
0121 : A Novel Soft-Switching Bridgeless Power Factor Correction Circuit
0122 : Control Model of a Closed Loop Power-Controlled Series-Type Resonant Induction Heating System
0124 : Novel Analytical Calculation Method for the Non-Linear Psi-i-Characteristic of Switched-Reluctance-Machines in Arbitrary Rotor Positions
0128 : ANALYSIS AND COMPENSATION METHODS OF DEAD-TIME EFFECTS IN A PWM AC CHOPPER
0131 : Sensorless Control of PMSM Based on Extended Kalman Filter
0135 : Analysis and Calibration of a High Precision AD Converter
0138 : Lagrange's energy method based approach for switched reluctance drive systems modelling
0142 : Influence of voltage vectors of a NPC inverter on torque and flux variations of a DTC drive considering different load and speed conditions
0143 : Multi-level Converter Dimensioning with Structure and Losses Consideration for DFACTS Applications
0144 : Control of Doubly-fed Induction Generators under Asymmetrical Grid Conditions
0146 : High-Resolution Phase Shift and Digital Implementation of a Fuel Cell Powered UPS System
0148 : Low stand by power, self oscillating power supply
0150 : Stability of DC link with reduced energy storage for regenerative synchronous drive
0151 : Dual-Inductive Snubber Circuit Design for Three-Level Inverter
0152 : A new stacked NPC converter: 3L-topology and control
0153 : Comparison of Active Stabilization Methods for the Doubly-Fed Induction Generator - Quadrature versus Direct Inner Control Loops
0154 : State Control of an Electromagnetic Guiding System for Ropeless Elevators
0156 : Performance Enhancement and Comparison of Discrete Time Current Regulators for Parallel Active Filters
0157 : Control of Grid Connected AC-DC Converters with Minimized DC Link Capacitance under Unbalanced Grid Voltage Condition
0158 : Algorithm Evaluation for the Optimal Selection of the Space Vector Voltage using DPC in Power Systems
0159 : A Control Algorithm for Power Converters in the Field of Photovoltaic Application
0160 : 600kJ High Temperature SMES-based Sag Compensator
0162 : A Redundant Electrical Braking System for Wind Turbine Generators
0163 : Comparative Study of IPMSM Control Strategies for Torque Ripple Reduction
0164 : Predictive Direct Torque Control of an Induction Motor
0165 : The Automotive System Simulation by using Multi Domain Modeling Technique
0167 : A study on the Reactor Parameter of Atmosphere Plasma Power Supply
0168 : Characteristics of a Novel Switched Reluctance Motor having Permanent Magnets between the Stator Pole-Tips
0170 : Fuel cell powered railway vehicle and experimental test results
0171 : Carrier PWM Algorithm For Multi-leg Multilevel Inverters
0172 : Diode-Assisted Buck-Boost Voltage Source Inverters
0173 : Analysis of Carrier PWM Method for Common Mode Elimination in Multilevel Inverters
0175 : Novel Sensorless Control for PM Synchronous Motors Based on Maximum Torque Control Frame
0176 : Operational Analysis and Modulation Control of Three-Level Z-Source Inverters With Enhanced Output Waveform Quality
0177 : Predictive Direct Power Control of MV-Grid-connected Two-Level and Three-Level NPC Converters: Experimental Results
0178 : Induction generator model in phase coordinates for fault ride-through capability studies of wind turbines
0179 : A new 7.2kV Medium Voltage 3-Level-NPC inverter using 6.5kV-IGBTs
0180 : A New Low-Cost Motion Control Educational Equipment.
0181 : A Cascaded H-Bridge BLDC Drive Incorporating Battery Management
0182 : Convergence Test of Model Reference Signal Adaptive SRM Drives
0184 : A New Electromagnetic Model for PM Synchronous Machines
0187 : A high power density converter system for the Gamesa G10x 4,5 MW turbine
0188 : Modular pulsed generator for kV and kHz applications based on forward converters association
0189 : Three-level Converter based Active Filter for harmonic compensation of 4 MW Induction Furnace
0191 : Supercapacitors and Battery power management for Hybrid Vehicle Applications Using multi boost and full bridge Converters
0193 : A Back to Back Multilevel Converter for Driving Low Inductance Brushless AC Machines
0194 : Inverter Power Sizing Considerations in Grid-Connected PV Systems
0198 : Parallel-connected converters for optimizing efficiency, reliability and grid harmonics in a wind turbine
0201 : A Buck-Boost bidirectional converter to drive piezoelectric actuators
0204 : Power factor control of the LCC current-output resonant converter
0206 : Design of an LCC current-output resonant converter for use as a constant current source
0207 : Novel Adaptive Flux Observer for Wide Speed Range Sensorless Control of Induction Motor
0208 : Comparison of Methods for the Analysis of the Parallel Resonant Converter with Capacitive Output Filter
0209 : Control method and snubber selection for a 5 MW wind turbine single active bridge DC/DC converter
0210 : Real-Time Compact Electronic Thermal Modelling for Health Monitoring
0212 : A Current-Mode Controlled Maximum Power Point Tracking Converter for Building Integrated Photovoltaics
0215 : Two rotors designs’ comparison of permanent magnet brushless synchronousmotor for an electric power steering application
0218 : Sliding mode control of a doubly-fed induction generator
0219 : An accurate evaluation of electric discharge machining bearings currents in inverter-driven induction motors
0220 : Transformerless Topologies for Future Stationary AC-Railway Power Supply
0221 : Industrial D-STATCOM chain link modeling and control
0223 : Research and test platform for hybrid electric vehicle with the super capacitor based energy storage
0224 : ENERGY MANAGEMENT AND SIZING OF STORAGE DEVICES OF A HYBRID LOCOMOTIVE
0226 : Method of identifying voltage difference of super capacitors and principle of voltage balancing
0228 : Configuration and verification of the super capacitor based energy storage as peak power unit in hybrid electric vehicles
0229 : An Education and Research Prototyping Platform forSwitched Reluctance Motor Drives
0230 : High temperature behaviour of aluminium nitride
0232 : Feed-forward control of non-linear inductors providing soft-switching of dc-dc-converters
0233 : A hybrid physical-behavioral flourescent lamp model suitable for use in SPICE and Simulink
0234 : INCREASE PEDESTRIAN SAFETY BY CRITICAL CROSSROADS LIGHTING MEASURMENTS AND ANALYZING
0235 : Power Quality Monitoring System in a Low Cost Hardware/Software
0236 : Simplified Drive System Models for Power System Transient Studies in Industrial Plants
0237 : Fast On-Line Symmetrical Components Separation Method for Synchronization and Control Purposes in Three Phase Distributed Power Generation Systems
0238 : A New Architecture for Offshore Wind Farms
0241 : A variable frequency high-voltage power supply for hot-restrike modelling of HID lamps
0245 : Design approach of newly developed 3.3kV IGBT modules
0248 : Design of Brushless DC Motor for Air Management System of Fuel Cell Modules
0250 : A simple parameter estimation method for vector control of an induction motor
0251 : Study and Simulation of the Energy Balance of an Urban Transportation Network
0252 : New flux weakening control for high saliency interior permanent magnet synchronous machine without any tables
0253 : High current capacitor discharge power converters for the magnetic lenses of a neutrino beam facility
0254 : Analysis of Stator Voltage Observers for a Doubly Fed Induction Generator
0255 : Determination of the feedback capacity of a low voltage trench gate MOSFET from dynamic measurements
0256 : The modern approach to practical trainings for specialists of automatics
0257 : Loss Calculation of a Frequency Converter with a Fixed-Step Circuit Simulator
0258 : Performance Characteristics of a Practical Scale Wind Turbine Generating System using a Shaft Generator System
0259 : Modelling & Control of a Bidirectional Converter for a Stand-alone Photovoltaic Power Plant
0260 : On-line Phase Measurements in Switched Reluctance Motor Drives
0261 : Simulation model based control development for a multifunctional PV-inverter
0262 : Analytical model describing the operation behaviour of Transverse Flux Machines in flat magnet configuration
0263 : Selective Harmonic Current Mitigation with Shunt Active Power Filter
0264 : Active Damping of LCL Resonance with Minimum Sensor Effort by Means of a Digital Infinite Impulse Response Filter
0265 : High performance cooling system for automotive inverters
0266 : Position control of a Transverse Flux Motor with reduced torque ripples for Direct Servo-Drive Applications using shaped currents with harmonics control
0268 : Analysis of Self-Oscillating DC-DC Resonant Power Converters using a Hysteretic Relay
0269 : New Compensation Method of Unbalanced 3-phase Voltage Supply in Soft-Starter for Induction Motors
0271 : A Software Simulation Program for a Hybrid Fuel Cell – Battery Power Supply for an Electric Forklift
0274 : Low EMI noise Techniques of the 6th Generation IGBT module
0276 : Direct Torque Control for Interior Permanent Magnet Synchronous Motors with Respect to Optimal Efficiency
0277 : Evaluation of Silicon Carbide Devices for Hybrid Vehicle Drives
0278 : Core loss model for nanocrystalline cores for full and half bridge waveforms
0279 : Active Power Filtering by A Flying-Capacitor Multilevel Inverter with Capacitor Voltage Balance
0281 : Advantages of 3-stage-DC/DC-converters for Server Switch Mode Power Supply (SMPS) applications
0283 : A Novel Control Algorithm of a Three-phase PWM Inverter with Output LC Filter
0285 : Multilevel converters for UPS applications: comparison and implementation
0286 : Space vector modulation of nine-phase voltage source inverters based on three-phase decomposition
0287 : Anti-slip Re-adhesion Control Based on Disturbance Observer Considering Bogie Vibration
0288 : Next Generation of IGBT-Modules Applied to High Power Traction
0289 : Energy Generation System Behaviour using a Clocked Fuzzy Peak Current Control
0290 : Measurements of HF Current Propagation to Low Voltage Grid through Frequency Converter
0291 : Intelligent bidirectional power switch module for matrix converter applications
0292 : WINDFACT, a solution for the grid code compliance of the windfarms in operation
0294 : Thermal behaviour of the power transistors in transient state: local temperature measurement by a close infra-red radiometric method
0295 : Three-Phase Inverter with Output LC Filter Using Predictive Control for UPS Applications
0296 : A High Voltage Pulsed Power Supply with Magnetic Switch for ESP
0297 : Optimal Design of a Flux Switching Permanent Magnet Machine for Minimum Cogging Torque
0298 : The Modulation Method for The Three-level-Output-Stage Sparse Matrix Converter
0299 : Output Maximization of Wind Generation System Using Sensorless Controlled IPMSG
0300 : Long Life UPS based on Active filter and Flywheel without Electrolytic Capacitor
0301 : Buck-Boost Impedance Networks
0302 : Design and experimental investigation of a magnetically suspended rotary table
0303 : Traction Power Converter for PEM Fuel Cell Multi-Stack Generator
0304 : A Selective Harmonic Elimination system for restoring and equalising DC link voltages in a multilevel active rectifier
0306 : A SIMPLE GENERIC WIND TURBINE MODEL FOR GRID STUDIES
0307 : Friction compensation for a robust H8-optimal position control of low order for a multi-mass system
0308 : Optimal operation of a single phase converter by switching frequency changes
0309 : A novel 60MW Pulsed Power System based on Capacitive Energy Storage for Particle Accelerators
0310 : A Novel Vector Controlled Current Source Active Power Filter and its Comparison with a Traditional Topology
0311 : Energy Storage System with UltraCaps on Board of Railway Vehicles
0314 : A Novel High Channel Density Trench Power MOSFETs Design by Asymmetric Wing-cell Structure
0315 : Optimization of Soft-switched Flying Capacitor Multi-level Converters applied to STATCOMs
0316 : Analysis of stability for networks including converters
0317 : Parallel Operation of Thyristor- and IGBT-based HVDC
0318 : Fully FPGA-Based System on Chip Solution for Current Control of AC Machine.
0319 : Failure models in power device interconnects
0320 : ELECTRIC POWER-DIVIDER of HYBRID CAR PROPULSION SYSTEMS
0322 : Active Snubber Circuit for Source Commutated Converters
0324 : Experimental Studies on Fault Current Limiter by Voltage Source Inverter with Line Voltage Harmonics Compensation
0326 : A Simple Design Method Based on Vector Control of AC Machines with LC Filter
0327 : A Direct Predictive Control of Shunt Active Power Filters using Multicell
0328 : ZETA DC/DC Converter Used as LED lamp drive
0329 : Microcontroller-Based Quadratic Buck Converter Used as LED lamp driver
0330 : Three-Phase Multi-Level PWM Rectifier Multi-Carrier Discontinuous Voltage Modulation Strategy
0331 : Comparison of single-phase matrix converter and H-bridge converter for radio
0332 : SHORT-CIRCUIT FAULTS IN DISTRIBUTED AND CONCENTRATED WINDINGS OF PM SYNCHRONOUS MOTORS
0333 : Analysis and Implementation of a 2-Degree Of Freedom Control for a Three-Phase Induction Machine
0335 : Novel 3-Phase Phase-Locked Loop Composed of Adaptive Linear Combiner
0339 : SENSORLESS CONTROL OF SRM USING POSITION OBSERVER
0340 : FIVE-PHASE INVERTER MODULATION STRATEGY FOR HIGH PERFORMANCE MOTOR DRIVES: ANALYSIS OF THE VOLTAGE LIMIT
0341 : Adjustment, measurement and on-line detection of air gap asymmetry in
0342 : REDUNDANT DRIVE WITH DIRECT TORQUE CONTROL (DTC) AND DUAL-STAR SYNCHRONOUS MACHINE, SIMULATIONS AND VERIFICATION
0343 : A comparison of SPSA method and compact genetic algorithm for the optimization of induction motor position control
0345 : Physical Dynamic Modelling and Systematic Control Structure Design of a Double Linear Drive Moving Gantry Stage Industrial Robot
0346 : ELECTRIC BICYCLE USING BATTERIES AND SUPERCAPACITORS
0349 : Digital compensation of a high-frequency voltage-mode dc-dc converter
0350 : Advanced modular communication concepts for data logging and conditioning in photovoltaic inverter systems
0352 : The self-switching management principle applied toactive bidirectional switches
0354 : Poles position identification of permanent magnet axial flux motor using PIPCRM sensorless method.
0355 : Modified Sliding Mode Controller for Positioning of Micro Linear Motors
0358 : Control Unit for a Laboratory Motor Test Bench for Monitoring and Controlling PMSMs and Induction Motors
0359 : A 4-quadrant 300kW-peak high precision and bandwidth switch mode power converter for particle accelerator magnets supply
0360 : Ageing Test Results of low voltage MOSFET Modules for Electrical Vehicles
0361 : A new FPGA based control system for electrical propulsion with electronic differential
0362 : Real-Time Simulation of Finite-Element Analysis Permanent Magnet Synchronous Machine Drives on a FPGA card
0366 : Introduction and Evaluation of Novel Multi-level Carrier-Based PWM Strategies Using a Generalized Algorithm
0368 : BI-DIRECTIONAL DC- DC CONVERTERS FOR SUPERCAPACITOR BASED ENERGY BUFFER FOR ELECTRICAL GEN-SETS
0370 : A Novel Nine-Switch PWM Rectifier-Inverter Topology for Three-Phase UPS Applications
0371 : High Performances Supercapacitor Recovery System Including Power Factor Correction (PFC) For Elevators
0372 : SINGLE-PHASE HYBRID TRANSFORMER USING MATRIX-REACTANCE CHOPPER WITH CUK TOPOLOGY
0373 : Two Examples of Pedagogical Applications of Electrical Go-Karts
0374 : OUTPUT VOLTAGE CONTROL OF A FOUR-LEG INVERTER BASED THREE-PHASE UPS UTILIZING STATIONARY FRAME RESONANT FILTER BANKS
0375 : Efficient Control Method of Switched Reluctance Motor Using Direct Neighboring Phase Torque Distribution Technique
0377 : Sensorless Control of Hybrid Stepper Motor
0378 : A New FACTS Component — Distributed Power Flow Controller (DPFC)
0383 : Design of PM integrated motor-drive system for axial pumps
0385 : Digital Control of a Three-Phase Four-Leg Inverter under Unbalanced Voltage Conditions
0386 : Base-plate solder reliability study of IGBT modules for aeronautical application
0388 : Output Voltage Distortion Compensation for Half-Bridge Inverters
0390 : A Simple Photovoltaic Simulator for Testing of Power Electronics
0393 : Dynamic Analysis of Hybrid DC–DC Converters
0398 : Modeling of Common Mode Conducted Noise Emissions in PWM Inverter – Fed AC Motor Drive Systems
0399 : Digital-closed loop high-speed thyristor firing system for line-commutated converters
0401 : Phase-controlled line-commutated converter control in discontinuous conduction mode
0402 : An Improved Power Electronics Training Platform Using PIC Microcontrollers
0404 : Optimization of Combined Thermal and Electrical Behavior of Power Converters Using Multi-Objective Genetic Algorithms
0405 : Comparison of stress distributions and failure modes during thermal cycling and power cycling on high power IGBT module.
0406 : Fast connection /reconnection of the VSC to the power network
0407 : Contribution to the stress grading in integrated power modules
0408 : Robust performance of self-scheduled LPV control of doubly-fed induction generator in wind energy conversion systems
0409 : VHDL-AMS model of IGBT for electro-thermal simulation
0410 : A simple indirect voltage sensing method for line-connected inverters
0411 : Wind generation stabilization using a hydrogen buffer
0413 : A New Model of Vector-Controlled Doubly-Salient Permanent Magnet Motor in Brushless AC Operation
0415 : ELECTROMAGNETIC ANALYSIS OF THE INDUCTION MOTOR WITH SPIRAL SHEET ROTOR
0416 : CURRENT DEMAND OF HIGH PERFORMANCE INVERTERS FOR RENEWABLE
0417 : Feasible series compensation applications using Magnetic Energy Recovery Switch (MERS)
0418 : Development of IGCT module and blip resistor for KSTAR
0420 : Theoretical analysis of cancellation of DC-link current harmonics in the inverter-controlled DC electric railcar
0421 : Position Sensorless Control of Permanent Magnet Synchronous Motor at Low Speed Range Using Harmonic Voltage Injection
0422 : Exercise Bike Powered Electric Generator for Fitness Club Appliances
0424 : THERMAL RUNAWAY EVALUATION FOR HIGH TEMPERATURE TRIACS
0425 : The BTF (Beam Transfer Facility) DC/Pulsed 50 kW power converter for DAFNE injector
0426 : 1.2 kV Rectifiers Thermal Behaviour: comparison between Si PiN, 4H-SiC Schottky and 4H-SiC JBS diodes
0428 : Evaluation of Three-phase Transformerless PV Inverter Topologies
0429 : INTEGRATED PROPULSION AND AUXILIARY SUPPLY SYSTEMSFOR CROSS-BORDER OPERATION
0430 : Comparison of Direct Resonant Converter Topologies for High Power RF Applications
0432 : Modulation Strategies for a Mutually Commutated Converter System in Wind Farms
0433 : A MULTI-PULSE DIODE RECTIFIER WITH A COUPLED THREE-PHASE REACTOR AND ADDITIONAL SMALL SHUNT ACTIVE POWER FILTER
0435 : Test bench for grid code simulations for multi-MW wind turbines
0436 : Inverter Excited Induction Machine for High Performance Wind Power Generation System
0437 : Digital Speed Control System for a Motor Using Two Speed Detection Methods of an Incremental Encoder
0439 : Stationary Frame Voltage Harmonic Controller for Standalone Power Generation
0440 : 600V SOI Gate Driver IC with Advanced Level Shifter Concepts for Medium and High Power Applications
0441 : Centralized supervision of reactive power generation for a wind farm
0442 : Novel motion sensorless control of stand alone permanent magnet synchronous generator(PMSG): harmonics and negative sequence voltage compensation under nonlinear load
0444 : Torsional Dynamics of Generator-Units during Autonomous Operation
0445 : Turn-off failure mechanism analysis of Trench IGBT under clamped inductive switching operation
0446 : Power Stage for Permanent Magnet Synchronous Motors in High Current Automotive Applications
0448 : A Novel Control Strategy for Direct Interface Converters Used for DC and AC Power Supplies
0451 : Contactless Planar Actuator with Manipulator
0452 : Balanced Grid Currents in Three-Level Voltage-Source Inverters Connected to the Utility under Distorted Condition using Symmetrical Components and Linear Quadratic Regulator
0454 : An approach to building more compact power electronic converters
0456 : New Field Weakening Strategy for AC Machine Drives for Light Traction Vehicles
0457 : On the Properties of Full-Order Observers for Sensorless Induction Motor Drives
0459 : Modeling the Space Elevator – A Project Oriented Approach for Teaching Experimental Power Electronics
0460 : Stability Analysis of Converter-Grid Interaction using the Converter Input Admittance
0461 : Design Considerations of a Voltage-fed Full Bridge DC-DC Converter with High Voltage Gain for Fuel Cell Applications
0462 : An experimentally verified Compact Transient Electro-thermal modelingprocedure for Power systems.
0463 : Novel Voltage Balancing Technique For Series Connection of IGBTs
0464 : High temperature characterization of SiC-JFET and modelling
0465 : Design and control of a Fuel Cell DC/DC Converter for Embarked Applications
0467 : Grid Frequency Control Design for Offshore Wind Farms with Naturally Commutated HVDC Link Connection
0468 : Implementation of Dynamically Reconfigurable Control Structures on a Single FPGA Platform
0474 : A Novel Class-D Amplifier for Automotive and Public Audition Audio Applications
0476 : Feed Forward Control of Turn off Performances of an IGBT in Short Circuit Conditions
0477 : VIRTUAL LABORATORY FOR COMBINED SOLAR ENERGY SYSTEM
0478 : Optimal Direct-Drive Permanent Magnet Wind Generator Systems for Different Rated Wind Speeds
0479 : Hybrid Cycloconverters: An Exploration of Benefits
0481 : Contribution of Energy Storage Systems for Power Generation and Demand Balancing with Increasing Integration of Renewable Sources: Application to the Portuguese Power System
0482 : Induction Machines Fault Simulation Based on FEM Modelling
0483 : Fault detection in Induction Machines by using Continuous and Discrete Wavelet Decomposition
0486 : Four leg parallel Z-source inverter based DG systems to enhance the grid performance under unbalanced conditions
0488 : DC-link Voltage Balancing Algorithm Using a Space-Vector Hysteresis Current Control for Three-level VSI Applied for Wind Conversion System
0489 : Development Of A Single-Stage Three-Phase PV Module Integrated Converter
0493 : A Novel High DC Voltage Generator by LC Resonance in Supply Frequency
0494 : Dynamic Iron Loss Measurement Method for an AC Filter Inductor on a PWM Inverter
0495 : CRA Based Robust Digital Controller for a Single Phase UPS Inverter
0497 : 200kV Pulse Power Supply Implementation
0498 : Energy Consumption Analysis of FC-EDLC Hybrid Railway Vehicle by Dynamic Programming
0500 : Influence of power semiconductor and power supply design on EMC relevant emissions by the example of an arc welding inverter arrangement
0504 : Nonlinear Dynamics in Direct Torque Controlled Induction Machines Analyzed by Recurrence Plots
0506 : 50kVA Regenerative Active load for power test system
0508 : Performance Evaluation of Buck-Boost Three-Level Inverters with Topological and Modulation Development
0509 : Digitalizing Gate Control of High Efficiency, High Frequency and High Power Chopper Circuit SAZZ Using FPGA
0510 : On the Simulation of Valve Reactors
0512 : Benefits of System-oriented IGBT Module Design for High Power Inverters
0514 : Precise Digital Control Method with Sinusoid based Model for SinglePhase Utility Interactive Inverter with FPGA based Hardware Controller
0515 : Variable Sampling Quasi Multirate Deadbeat Control Method for PWM Inverter in Low Carrier Frequency
0518 : Comparison of DC-DC-converter Architectures of Power Management Circuits for Thermoelectric Generators
0522 : PWM Rectifier with LCL-Filter using different Current Control Structures
0524 : Doubly Fed Induction Machine Speed Drive for Hydro-Electric Power Station
0525 : Hermetic Packaging for Power Multichip Modules
0526 : A Simple Excitation Position Detection Method for Sensorless SRM Drive
0527 : An Encoder-free Grid Synchronization Method for a Doubly-fed Induction Generator
0528 : Extended EMF- and Parameter Observer for sensorless controlled PMSM-machines at low speed
0530 : Fault-Tolerant Inverter for on-board aircraft EHA.
0533 : A New Topology for PV DC/DC Converter with High Efficiency Under Wide Load Range
0534 : Comparison of 3D-SVPWM and Carrier-Based Pwm of Three-Phase Four-Leg Voltage Source Inverter for Power Supply Units
0535 : Comparison of Signal Injection Methods for Sensorless Control of PMSM at Very Low Speeds
0536 : Modeling and Simulation of Variable Speed Wind Generator System Using Boost Converter of Permanent Magnet Synchronous Generator
0537 : Indirect Maximum Torque per Ampere Control of Induction Motor Drives
0538 : Design and Comparison of Full-size Converters for Large Variable-Speed Wind Turbines
0543 : Multi-domain simulation platform for virtual prototyping of integrated power systems.
0544 : A novel Parallel Active Filter for Current Pulsation Smoothing on Single Stage Grid-connected AC-PV Modules
0545 : Optimal Operation of Induction Motor Drives
0546 : Single-Phase Current-Source Active Rectifier for Traction Applications: New Control Strategy based on Phase Shift Controller
0550 : Analysis of Frame Alignment Issues in Natural Field Orientation Including Non-Linear and Leakage Inductance Effects
0552 : Comparison of Si- and SiC-Powerdiodes in 100A-Modules
0553 : Stability Analysis of the Instantaneous Power Control (IPC) Algorithm for Induction Machines.
0554 : Simulation results of Novel Energy Storage Equipment Series-Connected to the Traction Inverter
0555 : Distributed Generation Power Inverters as Shunt Active Power Filters for Loss Minimization in the Distribution Network
0556 : Nonlinear adaptive control of a magnetic bearing
0557 : Reduction of magnetic field strength on PCB level - Laboratory for power electronics students
0559 : Evaluation of the Iron Loss of an Inductor Based on Dynamic Minor Characteristics
0561 : A Physics-based Power Diode Model Optimized Through Parameter Extraction with Experiment Basis
0562 : ROBUST SPEED AND POSITION CONTROL BASED ON NEURO AND FUZZY TECHNIQUES
0564 : ZVS-ZCS Full-Bridge DC-DC Converter for Voltage Step-Up in Fuel Cell Distributed Generation Systems
0566 : Implementation of supercapacitors in uninterruptible power supplies
0567 : DemodulationMethodsonFullyFPGA-BasedSystemforResolverSignalsTreatment
0569 : A NOVEL TOPOLOGY WITH HIGH EFFICIENCY FOR GRID CONNECTED PHOTOVOLTAIC PCS
0571 : Full solid-state pulsed power supplies for injection/extraction at SOLEIL
0572 : A New Soft-Switching Multi-Output Forward Converter with Independent and Precise Voltage Regulation
0574 : Recent developments in IGCT gate units
0576 : DESIGN OF THE DC AND AC MAGNET POWER SUPPLIES FOR THE SOLEIL SYNCHROTRON RADIATION SOURCE
0578 : The System Simulation for Small size and Ultra-High Speed Motor Drive System using Coupled analysis
0579 : Integrated design procedure for printed circuit board inductors in DC-to-DC converters
0580 : Analysis of the base current and the saturation voltage in 4H-SiC power BJTs
0584 : Accurate Initial Pole-Position Estimation of Surface PM-LSM in the Position Control
0585 : Medium Frequency Topology in Railway Applications
0586 : High Voltage, High Power Switches on CVD Diamond
0587 : A simple model of photovoltaic module electric characteristics
0588 : Optimization of a Linear Induction Oscillatory Machine in a Stirling Cogeneration system
0589 : A New Model for the Determination of Copper Losses in Transformer Windings with Arbitrary Conductor Distribution under High Frequency Sinusoidal Excitation
0590 : Stability Analysis of Current Digital Controllers for LCL Filters Connected to the Grid using State Feedback
0592 : WIDE-BAND POWER ELECTRONICS CURRENT SOURCEFOR REFERENCE PURPOSES
0593 : Space Vector Modulation Extended to Voltage Source Converters With Multiple Legs in Parallel
0594 : Test Platform for Hybrid Electric Power Systems:Development of a HIL Test platform
0595 : Signal Processing of Zero Sequence Voltage Technique
0596 : Noise propagation path identification of variable speed drive in time domain via common mode test mode
0597 : Disturbance rejection limitations of back-emf based sensorless PM drives
0598 : Assessment of an Induction Motor Drive for High Speed Operation based on Matrix Converter
0600 : Deep Trench MOSFET structures study for a 1200 Volts application
0602 : Three-Level Quadratic Non-Insulated Basic DC-DC Converters
0605 : Experimental Characterisation of High Efficiency Resonant Gate Driver Circuit
0606 : Optimal Sizing of Stand-Alone Hybrid Wind/PV System with Battery Storage
0607 : Neural Network Controlled Voltage Disturbance Detector and Output Voltage Regulator for Dynamic Voltage Restorer
0608 : Performance Comparison of a Left Shunt UPQC and a Right Shunt UPQC applied to Enhance Fault-Ride-Through Capability of a Fixed Speed Wind Generator
0612 : Impact of Permanent Magnet Field on Inductance Variation of a PMLSM
0614 : Steady-State Behaviour of an AC Autonomous Switched Reluctance Generator
0616 : A Control Strategy for an Autonomous Induction Generator Taking the Saturation Effect into Account
0617 : A New Control Method of Single-stage 4-Leg Matrix Converter
0621 : A self-commissioning method for permanent magnet dc-motor drives
0622 : Influence Analysis of the effects of an Inductive-Resistive Weak Grid over L and LCL Filter Current Hysteresis Controllers
0623 : An Electronic Ballast for Driving HID Lamps controlled with a FPGA Device
0624 : High efficiency LEVs
0625 : Maximum Torque/Minimum Flux Control of Interior Permanent Magnet Synchronous Motor Based on Magnetic Energy Model
0626 : Injecting position dependent currents in order to reduce oscillations caused by the gearbox of a dc-motor drive
0630 : A new modeling approach for circular spiral inductors
0631 : A Novel Engine Generator System with Active Filter and UPS Functions Using a Matrix Converter
0632 : A Fault Converter topology for Wind Energy Conversion System with Doubly Fed Induction Generator
0633 : Quasi-Static Decoupled Load Flow Modelling of a Power Supply Network with AC-DC Converters Applied to Light Rail System
0636 : SiC-Powerdiodes: Design and Performance
0637 : Use of resonant controller for grid-connected converters in case of large frequency fluctuations
0638 : Emulator for a DC-Machine, Working as an Actuator in a Torque Split Unit of an All-Wheel Driven Automobile
0639 : State space average modelling of 6- and 12-pulse diode rectifiers
0640 : An Education Tool for Laboratory Exercises with SMPS
0644 : Universal Matrix Converter for Power Conditioning in Electrical Vehicles Fed by a Fuel Cell Combined with Ultracapacitors
0645 : Control principle and modulation method for bi-directional and dual-coupled series resonant converters
0646 : Considerations of the Performance Characteristics of the Cableless Micro-actuator by Using Mechanical DC-AC Inverter
0649 : Steel Power losses simulation based on Inverter/Induction Machine Design
0650 : New Plasma Shaping Technology for Optimal High Voltage Diode Performance
0651 : Experimental Analysis of Temperature Distribution within Traction IGBT Modules
0652 : Performance of 3D capacitors integrated on silicon for DC-DC converter applications.
0653 : A Novel Small-Scale Variable Speed Hydropower Emulator Using an Inverter-Controlled Induction Motor
0654 : Design of current controller in an AC drive using a state stimulator concept
0656 : Fault-Tolerant Hybrid Four-Leg Multilevel Converter
0658 : EMC ISSUES OF CONTROLLED RECTIFIERS
0663 : Experimental study of supercapacitors ageing according to the temperature
0668 : Detent force compensation in Segmented Long Stator Permanent Magnet Linear Drives using Finite Element Models
0670 : Analysis Methods and Design of Transformers with Low Leakage Inductance for Pulsed Power Applications
0671 : Modelling of Permanent Magnet Synchronous Machines for Simulations of Transient Phenomena
0674 : Medium voltage three level inverter for high speed applications
0675 : On the common mode resonant frequency of transformers
0676 : Integration of Supercapacitors as Transient Energy Buffer in Automotive Power Nets
0677 : Three Phase Four Wires LC Coupled Shunt Active Power Filter (APF): New topology and control
0678 : GA-Based Autonomous Electromagnetic Design and Experimental Verification of Two-Phase Switched Reluctance Compressor Drive
0679 : Adaptive backstepping control of a completely unknown permanent magnet motor
0683 : EMI CHARACTERIZATION AND COMMUNICATION ASPECTS FOR POWER ELECTRONICS IN HYBRID VEHICLES
0684 : A new method of adaptive predictive control in multimass electromechanical systems with variable parameters
0685 : Direct Power Control of Shunt Active Filter
0688 : A Zero Speed Operation Sensorless PMSM Drive Without Additional Test Signal Injection
0690 : Experimental Characterization Methods for Power MOSFET Assemblies
0692 : Studies on a LV DC network
0693 : Teaching drive control using Energetic Macroscopic Representation - initiation level
0694 : Hardware-in-the-loop simulation of the traction system of an automatic subway
0696 : A review of current state-of-the-art piezoelectric transformer technology
0697 : Parameterization of DC/DC Converter Models for System level Simulation
0699 : Theoretical Analysis and Optimal Design of LLC Resonant Converter
0700 : A Novel Maximum Power Point Tracker Controlling Several Converters Connected to Photovoltaic Arrays with Particle Swarm Optimization Technique
0701 : A Novel Resonant Boost Converter with Double Switches Improved by PLL
0704 : Improved STATCOM Operation Under Transient Disturbances for Wind Power Applications
0705 : Application of Multiple integrator based controllers for low switching frequency Multilevel NPC Power Active Filters: limitations and improved structures
0708 : Field Oriented Control of IPM Drives for Optimal Constant Power Operation
0710 : FPGA-based Vector PI Regulator for Electrical Drives Control
0711 : Presentation of a Four-Quadrant Converter Based System in Traction Applications – Reference to Modeling, Simulation and Analysis
0713 : Power Electronic Converters Distribution in HOST Hybrid Propulsion System
0714 : 3-Level High Power Converter with Press Pack IGBT
0715 : Power Electronics Traction Transformer
0716 : Digital Power Supply Controller for control of extremely precise power supplies
0718 : Power Supply with Independently Regulated Multiple Outputs
0719 : Sensorless Control of a Wound Rotor Synchronous Belt-Driven Starter-Alternator
0720 : Simulation based analysis of a monolithically integrated fast and slow IGBT structure
0721 : Silicon Carbide (SiC) D-MOS for Grid-Feeding Solar-Inverters
0722 : Association of wind turbine based dispersed generators and storage systems to participate in primary frequency control
0723 : Experimental Comparison of Three-Phase Distributed Generation Systems Based on VOC and DPC Control Techniques
0725 : A Novel Method for PM Synchronous Machine Rotor Position Detection
0727 : MODIFIED DOUBLE-MODULAITON SIGNAL PWM CONTROL FOR D-STATCOM USING FIVE-LEVEL DOUBLE CONVERTER
0729 : Current Measurement-Based Detection of Load Torque Changes in a Variable Speed VSI Induction Motor Drive to Support Motor Diagnostics
0730 : A Wireless ZigBee-based Torque Sensor for an Underwater Power Generator
0734 : A Simple Starting Method for Self-Controlled Synchronous Motors in Electric Propulsion Systems for Ships
0735 : INDUCTION MACHINE MODELLING USING PERMEANCE NETWORK METHOD FOR DYNAMIC SIMULATION OF AIR-GAP ECCENTRICITY
0736 : Resonance Suppression Control in Complex Frame for Three-Phase to Three-Phase Matrix Converters
0737 : Simple Fault-Ride Through Capability Analysis for Wind Power Plants under Different Grid Code Requirements
0738 : Optimising high frequency integrator operation of Rogowski current transducers
0741 : Power Loss Design Platform for High Output Power Density Converters
0743 : Novel Inverter Topologies for Two-Wheel Drive Electric Vehicles with Two Permanent Magnet Synchronous Motors
0745 : Phase-Locked Loop with Adaptive Signal Cancellation for Three-phase Network Side Voltage Source Inverter
0747 : Design of Current Controllers for Active Power Filters using Naslin Polynomial Technique
0748 : Multiphase Converter Structures AppliedTo Integrated Micro-Power Application Circuits.
0749 : The Control and Structure of the Power Electronic System Supplying the Flywheel Energy Storage (FES)
0751 : Single-Phase Grid-Connected Photovoltaic Systems With Power Quality Conditioner Functionality
0752 : Static Synchronous Series Compensation applied to Small Wind Energy Conversion System
0755 : Real-time estimation of fundamental frequency and harmonics for active power filters applications in aircraft electrical systems
0756 : Compensation of Output Voltage Distortion Analysis of PWM Inverter with LC Filter Caused by Device Voltage Drop
0758 : Clamping for current-fed dc/dc converters with recovery of clamping energy in fuel cell inverter systems
0760 : Regenerative Turn-off Power Devices
0761 : A novel hysteresis voltage control for Series Active Power filter
0765 : A Robust Control Technique for Parallel Operation of Uninterruptible Power Supply Inverters
0766 : Piezo-actuators for force feedback in human-computer interfaces: advantages and drawbacks with regard to electromagnetic actuation
0767 : Electrical characterization of 5kV SiC bipolar diodes in switching transient regime
0768 : Modelling and control of a 100kW photovoltaic inverter with an LCL grid filter for distributed power systems
0769 : AC Motor Transients and EMI Emission Analysis in the ASD by Parasitic Resonance Effects Identification
0771 : Using the model of the solar cell for determining the maximum power point of photovoltaic systems
0772 : Analysis of Three Phase Grid Failure and Doubly Fed Induction Generator Ride-through using Crowbars
0773 : Run-Time Reconfiguration of FPGA-Based Drive Controllers
0778 : STATCOM Operation under Single Line-Ground System Faults with Magnetic Saturation in Series Connected Transformers based 48-pulse Voltage-Source Converter
0781 : Digitally Controlled Point of Load Converter with Very Fast Transient Response
0782 : Cancellation of the Common Mode Voltage in a 3-phase Current Source Rectifier
0783 : Parameter estimation for induction motors to study the effects of voltage, frequency and slip
0784 : Analytical Calculation of the RMS Current Stress on the DC Link Capacitor for a VSI Employing Reduced Common Mode Voltage PWM
0785 : Full Bridge Phase-Shifted Soft Switching High-Frequency Inverter with Boost PFC Function for Induction Heating System
0788 : Power Electronics for Hybrid-Drive Systems
0789 : An Improved ZVT PWM Boost Rectifier with High Power Factor and Low Conduction Losses
0790 : High First Torque Harmonic Due to Insufficient Function of Dead-Time Compensation in PWM Inverters
0791 : Power Conditioning of a 132 MW Wind Farm
0792 : A First Evaluation on the Usage of Threshold Triggered Magnetic Field Sensors for Current Polarity Detection in Power Conversion Systems
0795 : Specialized Receivers for Three-Phase Contactless Energy Transfer Desktop Applications
0796 : Multi-Dimensional Space Vector Pulse Width Modulation for Disturbance-Free Operation of a Five-Phase AC Motor Drive
0797 : Modelling of Quantization Effects in Current Control for a Synchronous Servo Drive
0798 : Simplifying Approach for Analysis of Space-Vector PWM for Three-Phase and Multiphase Converters
0800 : Power Cycling Induced Failure Mechanisms in Solder Layers
0801 : New drive concepts reduce power requirements of large servo presses
0802 : Servo drives introduce improved synchronization of large presses with robots
0804 : Analysis on the increased losses in supply systems due to voltage drop and voltage distortion
0806 : Research on Eliminating Common-mode Voltage of Cascaded Medium-voltage Variable Frequency Driver with Phase-difference SVPWM
0808 : Use of Dynamic Emulation of Mechanical Loads in the Testing of Electrical Vehicle Driveline Control Algorithms
0810 : High Voltage 3D-Capacitor
0811 : Wide input Voltage range Compensation in DC/DC Resonant Architecture for On-Board Traction Power Supplies
0815 : Diagnosis of rotor faults in direct and indirect FOC induction motor drives
0819 : Active rectifier design and advanced control for medium voltage
0820 : Load Sharing of the Parallel Operating Adjustable Speed Generation Systems without Control Signal Interconnection
0822 : A novel technique to reduce reverse recovery charge of a power diode
0825 : A Comparative Analysis between the Symmetric and the Hybrid Asymmetric Nine-Level Series Connected H-Bridge Cells Inverter
0826 : A STAND-ALONE PHOTOVOLTAIC SYSTEM BASED ON DC-DC CONVERTERS IN A MULTI-STRING CONFIGURATION
0830 : Control of Back-to-Back-Connected Neutral-Point-Clamped Converters in Wind Mill Applications
0831 : Design of closed loop audio power amplifiers by means of an accurate model of vented box loudspeakers
0832 : Improvement of the Voltage Compensation Performance of the Series Active Power Filter Using a Simple PI-Control Method
0834 : Development of High Torque Density and Efficiency Switched Reluctance Motor with 0.1mm short airgap
0838 : Modelling Magnetic Saturation Effects in IPMSMs for use in Sensorless Saliency Based Methods
0848 : Rotor Time Constant Adaptation with ANN Application
0849 : A Low Voltage Dynamic Voltage Restorer with Self-Charging Capability
0850 : A new method to define power and energy share in a DC link Hybrid wind-diesel powered system by means of storage and dual time-frequency approach
0854 : Study on advanced power device performance under real circuit conditions with an exact power loss simulator
0855 : A method of power regulation applied to the high frequency inverter for the IH home appliances
0856 : A three level inverter concept for low voltage applications
0857 : Parameter Estimation of a DC/DC Buck Converter Using a Continuous Time Model
0858 : Accurate Sliding-Mode Control System Modeling for Buck Converters
0859 : Study of CVD diamond films for thermal management in power electronics
0860 : SMIS – a prospective solution for power MOSFET transistor
0861 : MRAS Speed sensorless vector control of Induction Machine with saturation and Iron Loss Effects compensation
0862 : IMROVED VECTOR CONTROL OF INDUCTION MOTOR DRIVE USING GENETIC ALGORITHMS-BASE MACHINE AND CONTROL PARAMETERS ESTIMATION
0863 : Parallel Operation of Uninterruptible Power Supply Systems in MicroGrids
0864 : Active Damping of Resonance Oscillations in LCL-Filters Based on Virtual Flux and Virtual resistor
0867 : A network model for inverter-fed induction-motor drives
0868 : Harmonic Distortion of Multicarrier PWM Strategies in Cascaded Multilevel Converters with Unequal DC Sources
0871 : Developing a Simple, Modern and Cost Effective System for EMC Pre-Compliance Measurements of Conducted Emissions
0872 : Application of digital phase lock loop for control of SRM drive.
0873 : Implementation of a Control Strategy for PFC with FPGA
0875 : A new modulation technique for a three phase PWM buck rectifier
0876 : Comparative Study of Two Predictive Direct Power Control Algorithms for Three-Phase AC/DC Converters
0878 : A new Cycle Test System emulating Inductive Switching Waveforms
0879 : Analysis and filtering of common mode and shaft voltages in adjustable speed AC drives
0881 : LOOP-SHAPING H8 CONTROL FOR A DOUBLY FED INDUCTION MOTOR
0882 : Increased recuperation efficiency by increment of the recuperation voltage to 1950V in a 1500V DC catenary system.
0883 : A Soft-Switched Bi-Directional DC-DC Converter
0884 : Integrated series active filter for aerospace flight control surface actuation
0885 : Prototype of an Axial Flux Permanent Magnet Generator for Wind Energy Systems Applications
0886 : Torque Ripple Reduction in PMSM DTC Drives using Matrix Converters
0891 : Active piezoelectric vibration controls for high speed switched reluctance machine
0892 : A simpler and faster method for SVM implementation
0893 : A current-controlled fuel cell system with short-time storage for gird feeding application
0894 : Modeling and Simulation of Controlled Bi-directional Power Electronic Converters in a DC Energy Distribution Line with AC Grid- and Motor-Side Active Filtering
0895 : Detection of Rotor Faults in Torque Controlled Induction Motor Drives
0899 : Comparative Evaluation of IGCT and GTO Thyristor for series connection in high power voltage source inverter based FACTS applications
0903 : The Design Method of the Inverter for Heating Both a Ferromagnetic Metal and a Paramagnetic Metal
0905 : Variable sampling period IM vector control for high performance medium voltage drive
0906 : High Power Inverter using Press Pack IGBT for High Speed Applications
0907 : Design of Propulsion System for a Fuel Cell Vehicle
0908 : Harmonic Suppression Technology of Three-Phase Diode Rectifier Based on Third Harmonic Current Injection
0909 : A Novel Simulation Algorithm for Frequency Analysis of Switching Converters
0910 : Analysis and Development of a Ride-through Device for AC Contactors
0919 : Control of Induction Motor Drives Equipped with Small DC-Link Capacitance
0920 : A Single-Stage Power Factor Correction Switched Mode Power Supply
0922 : High Reliability Motor Control for Aerospace Applications
0923 : Remote controlled practical education for Power Electronics
0924 : Mechanical Resonance Damping in an Industrial Servo Drive
0926 : Self-tuning of MTPA current vector generation scheme for IPM synchronous motor drives
0929 : Small-Signal Model for Saturated Deep-Bar Induction Machines
0930 : A NEW BALANCING TECHNIQUE WITH POWER LOSSES MINIMIZATION IN DIODE-CLAMPED MULTILEVEL CONVERTERS
0931 : Improvement of a static system for water condensation supplied with Photo Voltaic energy
0933 : Interleaved Boost Converter System for Unity Power Factor Operation
0934 : Tap Changer for Distributed Power
0941 : Control of series compensated induction motor using magnetic energy recovery switch
0943 : QFT-Based Robust Controller Design for a DC-DC Switching Power Converter
0945 : Ruggedness of High Voltage Diodes under very hard Commutation Conditons
0946 : Reactive Power Generation by DFIG based Wind Farms with AC Grid Connection
0947 : Advanced Composite Materials with Tailored Thermal Properties for Heat Sink Applications
0951 : Estimation of the costs due to renewable energies for a transmission system operator
0952 : A Simple Method for Analytical Evaluation of LVRT in Wind Energy for Induction Generators with STATCOM or SVC
0953 : Storage of fluctuating wind energy
0954 : Silicon Carbide power devices - Status and upcoming challenges
0955 : Fault Ride-through Capability Implementation in Wind Turbine Converters Using a Decoupled Double Synchronous Reference Frame PLL
0956 : HYSTERETIC CURRENT CONTROLLED ZVS DC/DC CONVERTER FOR AUTOMOBILES
0957 : Keynote: Today’s and Tomorrow’s Meaning of Power Electronics within the Grid Interconnection
0958 : System optimization based on the example of the solar plane SolarImpulse
0959 : Industrial Session: Utility-Connected Power Electronic Compensators in Wind Power Applications
0960 : Industrial Session: Grid Compliance Conditioning of Renewable Power Sources by Means of Modern Power Electronics
0961 : Industrial Session: Wind Farm Flexible AC Transmission Systems
0962 : Industrial Session: STATCOM: Utility-Connected Power Electronic Compensator


Mise à jour le lundi 25 février 2019 à 15 h 32 - E-mail : thierry.lequeu@gmail.com
Cette page a été produite par le programme TXT2HTM.EXE, version 10.7.3 du 27 décembre 2018.

Copyright 2019 : TOP

Les informations contenues dans cette page sont à usage strict de Thierry LEQUEU et ne doivent être utilisées ou copiées par un tiers.
Powered by www.google.fr, www.e-kart.fr, l'atelier d'Aurélie - Coiffure mixte et barbier, La Boutique Kit Elec Shop and www.lequeu.fr.